|
jcFrames (new frame control)
|
Email
|
| Submitted on: |
12/30/2005 11:51:16 AM |
| By: |
Juan Carlos San Román
|
| Level: |
Intermediate |
| User Rating: |
By 32 Users |
| Compatibility: |
VB 5.0, VB 6.0 |
| Views: |
21873 |
|
(About the author) |
|
|
|
The jcFrames control (NEW VERSION!!!!!!!) will enable you to have new designs on your vb projects. This control provides 5 styles (including Windows XP style) for your frames and different features (caption aligments, textcolor, fillcolor, iconsize, picture, etc.).
Version 1.1 incorporates icon alignment and fixs errors of previous version.
Thanks to Jim K for doing the initial idea of the usercontrol using my job posted to PSC. Thanks to ElectroZ for his frame style used here as TextBox style.
|
 |
| |
|
 Download code
Note: Due to the size or complexity of this submission, the author has submitted it as a .zip file to shorten your download time. Afterdownloading it, you will need a program like Winzip to decompress it.Virus note:All files are scanned once-a-day by Planet Source Code for viruses, but new viruses come
out every day, so no prevention program can catch 100% of them. For your own safety, please:
- Re-scan downloaded files using your personal virus checker before using it.
- NEVER, EVER run compiled files (.exe's, .ocx's, .dll's etc.)--only run source code.
- Scan the source code with Minnow's Project Scanner
If you don't have a virus scanner, you can get one at many places on the net
including:McAfee.com
|
Terms of Agreement:
By using this code, you agree to the following terms...
- You may use
this code in your own programs (and may compile it into a program and distribute it in compiled format for languages that allow it) freely and with no charge.
- You MAY NOT redistribute this code (for example to a web site) without written permission from the original author. Failure to do so is a violation of copyright laws.
- You may link to this code from another website, but ONLY if it is not wrapped in a frame.
- You will abide by any additional copyright restrictions which the author may have placed in the code or code's description.
|
Other 6 submission(s) by this author
|
|
Report Bad Submission
|
Your Vote
|
| |
Other User Comments
|
 12/28/2005 1:44:18 PM: Heriberto Mantilla Santamaria
Thx look great, I can use this UC in my personal program.
(If this comment was disrespectful, please report it.)
|
12/28/2005 3:53:10 PM: jeremyxtz
Well done, very pretty. One small suggestion - to adjust the caption so its a bit further along and not where the icon is when left justified.
(If this comment was disrespectful, please report it.)
|
12/28/2005 4:36:30 PM: Jeff Mayes
Nicely done, 5 from me. Not quite a complete control, due to the need to add the 2 mods, but still very nice.
(If this comment was disrespectful, please report it.)
|
12/28/2005 4:46:45 PM: Jim K
Well, What is there to say. I have no hat on. If i had, i would take it off and bow. This is even more than a frame. With small changes, it Could be used even to skin forms. Beatifull work. No less than 5 for such work and it's well earned.
Regards
Jim K
(If this comment was disrespectful, please report it.)
|
12/28/2005 6:23:32 PM: Kenneth Foster
Very nice indeed. 5 from Texas although the demo did'nt work,the control and modules worked fine in another project.(Possibly the mods and control were in a different folder than the Demo form when you saved it)
(If this comment was disrespectful, please report it.)
|
12/29/2005 7:56:16 AM: Driss HANIB
very good work Juan Carlos.
works in win98 SE
(If this comment was disrespectful, please report it.)
|
12/29/2005 8:40:51 AM: Kumar V S
Some You did, but project could not be executable. it fires error during opeing & executing. Please correct it and resubmit.
(If this comment was disrespectful, please report it.)
|
12/29/2005 8:42:13 AM: xChaoSx
...missing files and errors
(If this comment was disrespectful, please report it.)
|
12/29/2005 10:12:23 AM: james kahl
looks and works great, do agree with jeremyxtz though, need to modify placement of left justified captions when an icon is displayed, but that is minor. Nice piece of work though.
(If this comment was disrespectful, please report it.)
|
12/29/2005 11:39:09 AM: TerriTop
Juan, looks and functions great (Icon placement aside). Congradualtions on a very fine peice of code! One suggestion, you might consider reducing the external dependancies by combining the API & TYpe declarations in the UserControl itself....Thanks again for sharing this! TerriTop
(If this comment was disrespectful, please report it.)
|
12/29/2005 11:54:06 AM: pietro ing. cecchi
very nice Juan...
5 from me
(If this comment was disrespectful, please report it.)
|
12/29/2005 1:34:21 PM: pietro ing. cecchi
as reported by: Jeff Mayes, Kenneth Foster, Kumar V S, xChaoSx I DETECTED WRONG PATHS IN jcFrames.vbp ***The paths are wrong because are valid for the author's computer only***
TO CORRECT THEM YOU HAVE MANDATORY TO USE WORDPAD AND SAVE IN MS-DOS TEXT FORMAT***
(If this comment was disrespectful, please report it.)
|
12/29/2005 1:35:41 PM: pietro ing. cecchi
These were your original Paths (parallel to the application path: your paths go back 1 time and than 1 time above):
The paths are wrong because are valid only for your computer.
Module=ModDeclare; ..\JCFRAM~1\ModDeclare.bas
Module=ModGrad; ..\JCFRAM~1\ModGrad.bas
Path32="..\JCFRAM~1"
CompatibleEXE32="..\JCFRAM~1\jcFrames .ocx"
These are the corrected ones:
Module=ModDeclare; ModDeclare.bas
Module=ModGrad; ModGrad.bas
Path32=""
CompatibleEXE32="jcFrames.ocx"
NOTICE that you have to use mandatory WordPad for the corrections, and save as MS-DOS text, otherwise VB doesn't load the jcFrames.vbp file.
(If this comment was disrespectful, please report it.)
|
12/29/2005 1:38:32 PM: pietro ing. cecchi
The author of this excellent code (Juan Carlos) should correct this file and re-upload the corrected zip.
For any more detail or if you want the corrected file jcFrames.vbp sent to you, drop me an email: pietrocecchi@inwind.it
(If this comment was disrespectful, please report it.)
|
12/29/2005 4:02:36 PM: Juan Carlos San Román
Tomorrow morning I will upload a fixed version of the job. Thanks to all PSC users for suggestions and found errors
(If this comment was disrespectful, please report it.)
|
12/29/2005 5:03:20 PM: M@rkS
Very nice. The module errors are annoying but not that difficult to reassociate again in the main project.
(If this comment was disrespectful, please report it.)
|
12/30/2005 1:53:27 AM: e-roq
This is fantastic... :)
Thanks for sharing... :)
5 Globes. :)
(If this comment was disrespectful, please report it.)
|
12/30/2005 12:18:27 PM: Juan Carlos San Román
In this version is already fixed all errors founded by you. Thanks to Pietro and Territop for yours advises.
(If this comment was disrespectful, please report it.)
|
12/30/2005 2:00:20 PM: JB
Very nicely done. 5 BIG 'UNS from me...
(If this comment was disrespectful, please report it.)
|
12/31/2005 2:15:56 AM: Tony Waite
I love it Please post more controls and programs like this they are fun and great to learn from.
5 Globes from me
(If this comment was disrespectful, please report it.)
|
12/31/2005 12:59:12 PM: Moisii Norbert
great.5*
(If this comment was disrespectful, please report it.)
|
1/2/2006 6:59:36 AM: WSC
Very attractive and versatile. Thank you! Gave you five globes.
(If this comment was disrespectful, please report it.)
|
1/4/2006 1:06:42 AM: rhea
Great Job!!!!! i used the control
directly in my application wihout
testing your PrjDemo.vbp and it
runs veryyyyyy fine gooooood!!!! two
thumbs up!!
(If this comment was disrespectful, please report it.)
|
1/4/2006 7:32:07 AM: Option Explicit
You submitted this on December 28 and it still won the December contest. A nice testament to this submission's quality! Congratulations.
(If this comment was disrespectful, please report it.)
|
1/6/2006 3:13:42 AM: skript
This is a sweet frame control! I would give this 10 globes, but its not possible to. I'm using this in my projects!
(If this comment was disrespectful, please report it.)
|
1/24/2006 1:52:44 AM: csf23
Thx... i like it.
(If this comment was disrespectful, please report it.)
|
2/2/2006 5:58:07 AM: Andre F. N. Dainese
What a great frame control! But I think it´s still missing an Enabled property... it is sometimes useful on projects.. Anyway 5 stars!
(If this comment was disrespectful, please report it.)
|
2/16/2006 11:00:13 AM: Chris
Any ideas on detecting mouse movement over the frame? Standard jcFrame1_MouseMove doesn't seem to work.
(If this comment was disrespectful, please report it.)
|
2/16/2006 3:33:48 PM: Juan Carlos San Román
Andre F. N. Dainese
There is an updated version of my jcFrames (2.0.1). you can see it at
http://www.planet-source-code.com/vb/scripts/ShowCode.asp?lngWId=1&txtCodeId=64261
This version has enabled property included for usercontrol and for each control contained in it.
Chris You are right, for the moment mousemove porperty doesn't work any idea is wellcome.
(If this comment was disrespectful, please report it.)
|
6/25/2006 8:04:38 AM: SADI
Thanks Men pls send you link for vote
my email smurati@yahoo.com
(If this comment was disrespectful, please report it.)
|
6/27/2006 7:32:58 AM: Arnel
I like your code is best in terms of styling the.
(If this comment was disrespectful, please report it.)
|
2/24/2007 7:15:50 PM: bruno_RAM
I see this program is amazing
it can change the frame style in a very nice way, and i like the code
5***** from me
=)
(If this comment was disrespectful, please report it.)
|
Add Your Feedback
Your feedback will be posted below and an email sent to
the author. Please remember that the author was kind enough to
share this with you, so any criticisms must be stated politely, or they
will be deleted. (For feedback not related to this particular code, please
click here instead.)
To post feedback, first please login.
|
